Guests who bought this also bought
Atabites SMD-Z 7HD Inert Filler
In order to get the best possible sound from your speaker stands, it is recommended that the main vertical columns are partially filled with a high density inert filler . Atabites has an approximate density of 2380KG/m cubed sq. compared to dry sand which has a typical rating of just 1631KG/m cubed sq.
By using Atabites you will reduce ringing and give a sonically dead platform from which to position bookshelf style speakers.
Featuring new zinc coated steel micro-discs, the Atabite SMD-Z 7HD inert filler has a uniformed range of particulate sizes giving consistent sonic performance. The Zinc coating adds mass, protects the filler from both oxidisation and degradation while enhancing the visual aesthetics.
PLEASE NOTE- Atabites are supplied by weight, not volume. (7 KG tubs). Some settling of contents may occur in transit.
Maximum approximate weight of Atabites that can be used for each pair of Atacama speaker stands:-
Nexus 5, Moseco 5, =7KG,
Nexus 6, Moseco 6, Duo 6, =10.4KG
Nexus 7, Moseco 7, Duo 7, =12.2KG
Nexus10, Moseco 10, =21KG
Moseco CC series, as above with corresponding leg height.
SLX1000=68KG (SL series, as SLX)
HMS1.1 & Moseco XL 500mm=34KG
HMS1.1 & Moseco XL 600mm=41.8KG
HMS2.1 & HMS2X-600=84KG
Apollo Cyclone 5= 7KG
Apollo Cyclone 6= 10.4KG
Apollo Cyclone 7= 12.2KG
Moseco 6, Duo 6=10.4KG
Moseco 7, Duo 7=12.2KG
(approximate number of tubs needed per pair of stands)
Audition 300 2 Tubs
Audition 400 3 Tubs
Audition 500 4 Tubs
Audition 600 5 Tubs
Audition 700 6 Tubs
Sonic results will depend on speaker stand positioning, type of speaker, room size, type of electronics and cabling, listening position and personal taste. However, as a general rule filling the stands approximately half to two thirds full generally gives the best results.
NOT suitable for Aurora 6 Speaker stands.
Filler can be used with non-Atacama/Apollo speaker stands but check suitability first with the stand manufacturer.