Atabites SMD-Z 7HD Inert Filler picture

Additional Images

Atabites SMD-Z 7HD Inert Filler
Atabites SMD-Z 7HD Inert Filler additional picture 1
Atabites SMD-Z 7HD Inert Filler additional picture 2
Atabites SMD-Z 7HD Inert Filler additional picture 3
Atabites SMD-Z 7HD Inert Filler additional picture 4
Atabites SMD-Z 7HD Inert Filler additional picture 5

Atabites SMD-Z 7HD Inert Filler

GBP£ 29.99
Item is available.
Item # Atabites II SMD-Z 7.5HD
  • UK Shipping Only
  • Mastercard
  • Visa
  • American Express
  • Buy now with PayPal

In order to get the best possible sound from your speaker stands, it is recommended that the main vertical columns are partially filled with a high density inert filler . Atabites has an approximate density of 2380KG/m cubed sq. compared to dry sand which has a typical rating of just 1631KG/m cubed sq.

By using Atabites you will reduce ringing and give a sonically dead platform from which to position bookshelf style speakers.

Featuring new zinc coated steel micro-discs, the Atabite SMD-Z 7HD inert filler has a uniformed range of particulate sizes giving consistent sonic performance. The Zinc coating adds mass, protects the filler from both oxidisation and degradation while enhancing the visual aesthetics.

PLEASE NOTE- Atabites are supplied by weight, not volume. (7 KG tubs). Some settling of contents may occur in transit.



Maximum approximate weight of Atabites that can be used for each pair of Atacama speaker stands:-

Nexus 5,  Moseco 5, =7KG,                         

Nexus 6,  Moseco 6, Duo 6, =10.4KG             

Nexus 7,  Moseco 7, Duo 7, =12.2KG 

Nexus10, Moseco 10, =21KG


Moseco CC series, as above with corresponding leg height. 








SLX1000=68KG (SL series, as SLX)

HMS1.1 & Moseco XL 500mm=34KG

HMS1.1 & Moseco XL 600mm=41.8KG

HMS1.1 700mm=55.4KG 

HMS2.1 & HMS2X-600=84KG


Apollo Cyclone 5= 7KG

Apollo Cyclone 6= 10.4KG

Apollo Cyclone 7= 12.2KG


Moseco 5=7KG

Moseco 6, Duo 6=10.4KG

Moseco 7, Duo 7=12.2KG

Moseco 10=21KG

Nexus 6i=8.2KG



Audition Series
(approximate number of tubs needed per pair of stands)

Audition 300     2 Tubs       
Audition 400     3 Tubs
Audition 500     4 Tubs
Audition 600     5 Tubs
Audition 700     6 Tubs


Sonic results will depend on speaker stand positioning, type of speaker, room size, type of electronics and cabling, listening position and personal taste. However, as a general rule filling the stands approximately half to two thirds full generally gives the best results.

NOT suitable for Aurora 6 Speaker stands.

Filler can be used with non-Atacama/Apollo speaker stands but check suitability first with the stand manufacturer.